How to Choose Saw Blades For Your Sliding Miter Saw to Get the Best Cuts

Compound Miter Saw

Who Else wants to know the time tested tips and techniques that guarantee you make expert quality cuts each time? Do you want to know, the way to select saw blades to your sliding compound miter saw to get the best cuts to achieve your success? As you read this guide, I believe you will start to see, knowing these basic techniques will make the difference.

1. Sliding miter, compound miter and power miter are crosscut saws. Combined with the ideal blade for the job, all of them perform hard compound angled cuts on moldings and framing materials easily and precision.

2. It’s at home with the smallest trim projects or larger structural framing material cutting jobs when equipped with the correct blade configuration. For the serious-minded handyman at which quality of cut and having the ideal tool for the job is concerned, a group of unique blades is necessary.

3. Designed as its name suggests, to make smooth, chip and splinter free cuts across the grain of wood molding and other construction materials. However, all blades aren’t created equal. To understand the differences, we need to familiarize ourselves with the sections of a saw blade and the way they affect performance.

Teeth Basically the longer teeth a blade gets the smoother and slower the cut will be.

Gullet Is the space cut from the blade plate before the teeth that enables the material being cut off to be eliminated. Consequently, more teeth provides a smoother cut while smaller gullets remove less material during cutting and a slower rate of cut is the outcome.

To get a crosscut saw, the best cutting blade is the Alternate Top Bevel (ATB) blade type which signifies the saw blade teeth alternative between a left and right hand bevel. This tooth configuration provides a smoother cut when crosscutting wood. The alternating beveled teeth form a knife-like border on both the left and right sides of the blade to produce a smoother clean cut.

Hook Angle refers to the angle of the cutting edge A positive hook angle gets the tooth angled in the way the blade moves, while a negative hook angle is just the opposite with the tooth cutting edge behind the middle line of the blade. To get a miter saw, the negative hook angle blade would be your ideal option.

Kerf Simply place the Kerf is the amount of substance That is being eliminated by the blade when it creates a cut. The conventional Kerf is one eighth of an inch. There are, however, quality, thin Kerf blades available for use in mobile and underpowered saws, particularly when an extension cable is used.

Used by the professionals for cutting seat rails, crown or baseboard moldings and leaving a superior smooth finished cut is an 80 toothed (ATB) negative pitch angled C3 or C4 top quality carbide blade.

Used by the professionals for cutting edge framing stuff and leaving a smooth cut is a 60 toothed (ATB) negative pitch angled C3 or C4 top quality carbide blade.

Better understanding of how a saw blade really works, you’ll be Able to impress your family and friends the next time the dialogue Comes up about blades.

You may also like

Leave a Reply

Your email address will not be published. Required fields are marked *